OPTEC USA products

Venum TLSO KIT

The VENUM™ TLSO Kit extends support from the sacrococcygeal junction up to the thoracic spine at the level of the inferior scapula. Its single drawstring pulley closure lets you increase support and compression with minimal effort. You can configure the kit with a Dorsal Lumbar Kit (DLK) or an anterior thoracic extension (ATE).

• HCPCS L0456
• Prefabricated Spinal

Options & attachments

Optec USA offers pectoral pad kits, sternal pad kits, and DLK options as add-ons.

STIRRUP ANKLE BRACE

This ankle stabilizer surrounds the ankle with rigid plastic lined with a soft interface. It's slim enough to fit in most shoes.

• Prefabricated Lower Limb

VENUM HYBRID HIP

The VENUM™ HYBRID Hip brace is a one-size-fits-all soft hip abduction brace that fits waist circumferences from 21" to 63", or up to 73" with the extender panel. The belt, thigh cuff, and hinge all adjust, so a single brace fits most patients regardless of size or shape.

• Prefabricated Lower Limb

Prefab TLC Hip Abduction Brace

Every component of the TLC™ Hip Abduction brace is unisex and universal, so one stocked brace can fit a wide range of patients. That lets your facility carry less inventory. A single Allen wrench adjusts the whole orthosis, including the multi-setting TLC hip joint.

• Prefabricated Lower Limb

Gladiator ROMPS

The Gladiator ROMPS from Optec USA is intended for post-operative and post-traumatic knee conditions, patellar and knee instabilities, and ligament rehabilitation.

• HCPCS L1832 · L1833
• Prefabricated Lower Limb

Gladiator OA MAX

The Gladiator OA MAX from Optec USA is a knee brace designed to unload the medial or lateral compartment in patients with osteoarthritis. It also provides protection and support for ligament injuries and instabilities. The Gladiator OA MAX weighs 1 lb 3.2 oz.

• HCPCS L1843 · L1851
• Prefabricated Lower Limb

Gladiator ACL PRO

Gladiator ACL PRO is a knee brace from Optec USA designed to unload the medial or lateral compartment in patients with osteoarthritis. It also provides protection and support for ligament injuries and instabilities.

• HCPCS L1843 · L1851
• Prefabricated Lower Limb

Gladiator ACL MAX

Gladiator ACL MAX is a double upright knee orthosis designed for ligament injuries and instabilities. It weighs 1 lb 9.4 oz.

• HCPCS L1845 · L1852
• Prefabricated Lower Limb

Gladiator ACL Lite

The Gladiator ACL Lite series from Optec USA is designed for ligament injuries and instabilities and features a lightweight moldable plastic frame. Breathable, silicone-laminated liners keep the brace in place, and the brace weighs 1 lb 0.1 oz.

• HCPCS L1845 · L1852
• Prefabricated Lower Limb

Gladiator 1832 / 1833

The Gladiator 1832 is a universal, adjustable knee brace from Optec USA for patients who can bear weight on the injured knee. It has a polycentric ROM hinge with aluminum uprights and weighs 10 oz.

• HCPCS L1832 · L1833
• Prefabricated Lower Limb

CTO (Cervical Thoracic Orthosis)

For patients who need cervical immobilization from C1 to T1, the Chelsea CTO from OPTEC USA restricts flexion, extension, rotation, and lateral bending at every cervical level. It comes in pediatric, youth/small adult, and adult sizes and can be fitted to male or female patients.

• Prefabricated Spinal

Primo Classic LSO & TLSO

The Primo Classic from OPTEC USA pairs a soft front panel with a rigid back. The rigid back provides structure, and the soft front lets the brace follow the patient's body.

• HCPCS L0462 · L0464 · L0637 · L0639 · L0650 · L0651
• Prefabricated Spinal

Edge SL LSO & TLSO

The Edge™ SL is a rigid spinal system for patients who need firm support but are prone to skin breakdown or sores, including geriatric patients. It pairs anterior and posterior polymer shells with removable, moisture-wicking soft padding.

• HCPCS L0462 · L0464 · L0637 · L0639 · L0650
• Prefabricated Spinal

Expander TLSO W/DLK & ATE

The Expander TLSO w/DLK & ATE from Optec USA is a patented thoracic-lumbar-sacral orthosis that combines an air pocket expansion system with a rigid posterior panel reaching the inferior scapular spine. It is designed for motion control in the sagittal, coronal, and transverse planes.

• HCPCS L0464 · L0462
• Prefabricated Spinal

Expander MAX LSO

The Expander MAX LSO from Optec USA is a patented lumbar-sacral orthosis with a rigid posterior panel that runs from the sacrococcygeal junction to the T-9 vertebra. An air pocket expansion system provides traction and sagittal-coronal control.

• HCPCS L0637 · L0650
• Prefabricated Spinal

Expander LSO

The Expander Traction LSO from Optec USA is a patented lumbar-sacral orthosis that uses an air pocket expansion system to provide traction. Its plastic panels are removable, and it is light enough to wear discreetly under normal clothing.

• HCPCS L0631 · L0648
• Prefabricated Spinal

SALO TLSO

The SALO™ spinal orthosis is built in three layers: plastic on the outside, rigid foam in the middle, and soft foam against the patient. It comes in both single-opening and bivalve designs.

• HCPCS L0488 · L0460
• SALO

SALO LSO

The SALO™ spinal orthosis is built in three layers: plastic on the outside, rigid foam in the middle, and soft foam against the patient. It comes in both single-opening and bivalve designs.

• HCPCS L0637 · L0650
• SALO

TLSO Rigid Stock

This rigid modular system comes in both LSO and TLSO configurations, for male and female patients. It restricts unwanted motion and controls the spine in one plane or several. Stock sizes run from X-Small to 3X-Large.

• HCPCS L0460
• Prefabricated Spinal

Stock TLSO 4 Panel

The Stock TLSO 4 Panel lets you choose the anterior thoracic extension (ATE): a sternal pad, a pectoral pad, or either one with extension adjustment. It also includes anterior and posterior shells and a Dorsal Lumbar Kit (DLK). Like the rest of OPTEC's rigid modular spinal system, it comes in prefabricated stock sizes that you can adapt during fitting.

• HCPCS L0464
• Stock

Stock TLSO 3 Panel

The Stock TLSO 3 Panel pairs rigid polyethylene and Aliplast anterior and posterior sections with a Dorsal Lumbar Kit (DLK). It's part of OPTEC's rigid modular spinal system and comes in prefabricated stock sizes that you can adapt to each patient.

• HCPCS L0462
• Stock

TLSO Bivalve With ATE

OPTEC's rigid spinal system combines the convenience of prefabricated stock sizes with the ability to fit each patient individually. Every size can be trimmed, molded, or modified at fitting.

• HCPCS L0462 · L0464
• Prefabricated Spinal

TLSO Anterior Overlap

OPTEC’s rigid spinal system is designed to restrict unwanted motion and control the spine in single or multiple planes of motion. Prefabricated stock sizes can be trimmed, molded or modified to provide your patients with an intimate custom fit. OPTEC’s rigid spinal system provides superior stabilization and support that your patients need with ultimate comfort they deserve.

• Prefabricated Spinal

LSO Soft Body Anterior Opening

The Soft Body Orthosis from Optec USA combines a rigid plastic core with soft foam on the inside and firm Aliplast on the outside and is designed for patients who cannot tolerate a rigid body jacket but still need similar support. It is offered in LSO and TLSO configurations, in sizes from X-Small to 3X-Large.

• HCPCS L0637 · L0650
• Prefabricated Spinal

Stock LSO Bivalve

OPTEC's LSO Bivalve is a modular rigid spinal system. It restricts unwanted motion and controls the spine in one or more planes. Prefabricated stock sizes can be trimmed, molded, or modified for a close custom fit. Bivalve design is available as smooth, butted or with tongue trim style.

• HCPCS L0637 · L0650
• Prefabricated Spinal

LSO Anterior Overlap

Optec USA's LSO Anterior Overlap is a rigid spinal system that restricts unwanted motion and controls the spine in single or multiple planes. It comes in prefabricated stock sizes from X-Small to 3X-Large and can be trimmed, molded, or modified for each patient.

• Prefabricated Spinal

LSO & TLSO Shells Only

Optec USA's LSO & TLSO Shells Only is a rigid modular spinal system sold as prefabricated stock shells, in sizes from X-Small to 3X-Large. Any size front can be combined with any size back and the shells can be finished in-house by central fabrication for custom patient fitting.

• Prefabricated Spinal

Oasis TLSO

The Oasis™ TLSO spinal system from Optec USA is a thoracic-lumbar-sacral orthosis for patients who need maximum support but cannot tolerate rigid braces. A traction closure system allows compression to be adjusted easily.

• HCPCS L0462 · L0464
• Prefabricated Spinal

Oasis LSO

The Oasis™ bivalve spinal system from Optec USA is intended for patients who need maximum support but cannot tolerate rigid braces. It features a traction closure system for compression adjustment and a fabric designed for breathability.

• HCPCS L0637 · L0650
• Prefabricated Spinal

VERTAMAX LSO & TLSO

OPTEC USA's VertaMax is made from a dense elastic material that provides firm compression. Its adjustable plastic panels conform to the patient without heat molding. It's available as an LSO or as a TLSO with a Dorsal Lumbar Kit (DLK), in gray, black, or beige.

• HCPCS L0627 · L0642
• Prefabricated Spinal

Evotec TLSO

The Evotec TLSO from Optec USA is a thoracic-lumbar-sacral orthosis built on the Vertamax corset. It is supplied with a Dorsal Lumbar Kit (DLK), with an optional Anterior Thoracic Extension (ATE) of your choice.

• HCPCS L0456 · L0457
• Prefabricated Spinal

Evotec MAX

Evotec Max is an Optec USA orthosis designed to be used through every stage of recovery. Its polymer panels can be removed as rehabilitation progresses.

• HCPCS L0637 · L0650
• Prefabricated Spinal

Evotec LSO

The Evotec LSO from Optec USA is a lumbar-sacral orthosis built on the Vertamax corset. Moldable front and back polymer panels give it adjustable rigidity that can change as a patient's rehabilitation progresses.

• HCPCS L0631 · L0648
• Prefabricated Spinal

Venum LSO

For patients who need firm spinal support but will only wear a brace they find comfortable, the VENUM™ is slim, breathable, and designed to sit discreetly under clothing. Its closure system makes it easy to put on and take off. It comes in sizes Small to 3X-Large.

• HCPCS L0627 · L0631 · L0637 · L0642 · L0648 · L0650
• Venum (all)

VENUM HYBRID X LSO

The VENUM™ Hybrid X LSO uses a double drawstring pulley closure with a 6:1 pull ratio. Patients can tighten the brace without much hand strength. This one-size-fits-all soft brace supports and immobilizes the lumbosacral spine, is designed to help reduce pain, and fits waists from 21" to 63".

• HCPCS L0637 · L0650
• Prefabricated Spinal

Venum Hybrid TLSO

One VENUM™ Hybrid TLSO fits waists from 21" to 63", or up to 73" with the optional extender panel. A single brace on the shelf can fit almost any patient who comes in. It's a soft brace that supports and immobilizes the spine and is designed to help reduce pain. You can configure the TLSO with a Dorsal Lumbar Kit (DLK) or an anterior thoracic extension (ATE).

• HCPCS L0456 · L0464
• Prefabricated Spinal

Venum Hybrid 637 Stock

The VENUM™ STOCK spinal system comes in seven stock sizes, Small to 4X-Large, covering waists from 25" to 60", in LSO and TLSO configurations. It's built for patients who need firm spinal support. A double-pull pulley closure makes it easy to put on and take off.

• HCPCS L0637 · L0650
• Prefabricated Spinal

VENUM HYBRID PRO LSO

The VENUM™ Hybrid PRO LSO is a one-size-fits-all soft brace that supports and immobilizes the lumbosacral spine and is designed to help reduce pain. Its single- or dual-pull closure provides a 6:1 pull ratio, and the posterior panel comes in your choice of an independent or central support design.

• HCPCS L0631 · L0648
• Prefabricated Spinal

VENUM HYBRID LITE LSO

The VENUM™ Hybrid Lite LSO is a one-size-fits-all soft brace that supports and immobilizes the lumbosacral spine and is designed to help reduce pain. Its single- or dual-pull closure provides a 6:1 pull ratio, and the posterior panel comes in your choice of an independent or central support design.

• HCPCS L0627 · L0642
• Prefabricated Spinal

VENUM 1 TLSO KIT

The VENUM™ 1 TLSO Kit adds a Dorsal Lumbar Kit (DLK) or your choice of anterior thoracic extension (ATE) to the one-size-fits-all VENUM 1 spinal orthosis. The base brace closes with a single drawstring pulley and has trimmable panels for custom sizing.

• HCPCS L0462 · L0464
• Venum (all)

VENUM 1 LSO

The VENUM™ 1 is a one-size-fits-all spinal orthosis with trimmable panels, so you can size it to each patient. It closes with a single drawstring pulley that takes little effort to tighten, which makes it well suited to patients with arthritis. It supports the spine from the sacrococcygeal junction to T9.

• HCPCS L0627 · L0631 · L0637 · L0642 · L0648 · L0650
• Prefabricated Spinal

Stealth X

The Stealth is one of OPTEC's most popular anterior-opening soft braces. A set of interchangeable plastic panels lets you change the Stealth's support as the patient moves through therapy, while the front and back panels contour to the patient's shape and lordotic curve. Polymer closure straps set the compression precisely, and the anterior opening makes this 3-in-1 soft brace easy to put on and take off.

• HCPCS L0637 · L0650
• Stealth (all)

Stealth TLSO

The Stealth is one of OPTEC's most popular anterior-opening soft braces. A set of interchangeable plastic panels lets you change the Stealth's support as the patient moves through therapy, while the front and back panels contour to the patient's shape and lordotic curve. Polymer closure straps set the compression precisely, and the anterior opening makes this 3-in-1 soft brace easy to put on and take off.

• HCPCS L0462 · L0464
• Stealth (all)

Stealth Rehab

The Stealth is one of OPTEC's most popular anterior-opening soft braces. A set of interchangeable plastic panels lets you change the Stealth's support as the patient moves through therapy, while the front and back panels contour to the patient's shape and lordotic curve. Polymer closure straps set the compression precisely, and the anterior opening makes this 3-in-1 soft brace easy to put on and take off.

• HCPCS L0627 · L0642
• Stealth (all)

Stealth PRO

The Stealth is one of OPTEC's most popular anterior-opening soft braces. A set of interchangeable plastic panels lets you change the Stealth's support as the patient moves through therapy, while the front and back panels contour to the patient's shape and lordotic curve. Polymer closure straps set the compression precisely, and the anterior opening makes this 3-in-1 soft brace easy to put on and take off.

• HCPCS L0631 · L0648
• Stealth (all)

Stealth LSO & LSO LP

The Stealth is one of OPTEC's most popular anterior-opening soft braces. A set of interchangeable plastic panels lets you change the Stealth's support as the patient moves through therapy, while the front and back panels contour to the patient's shape and lordotic curve. Polymer closure straps set the compression precisely, and the anterior opening makes this 3-in-1 soft brace easy to put on and take off.

• HCPCS L0637 · L0650
• Stealth (all)

Venum Hybrid Pediatric

Because the VENUM™ Hybrid Pediatric is one size fits all, you can keep it on hand and fit a child who needs spinal stabilization right away. It adjusts to waist circumferences from 12" to 26" and closes with a single- or dual-pull system that has a 6:1 pull ratio.

Prefab Pediatric Mini-TLC Hip Abduction Brace

The Mini-TLC from Optec USA is a pediatric hip abduction brace with a TLC Universal Hip Abduction joint that adjusts infinitely in abduction-adduction and flexion-extension. It is offered bilateral or unilateral, custom or prefabricated, in six unisex sizes.

Pediatric Custom TLSO Bivalve

This custom bivalve TLSO is available for pediatric patients. It can be personalized with a designer pattern chosen from OPTEC's pattern library and applied to the plastic. It's indicated for fractures, kyphosis, osteoporosis, and post-surgical support, and you control nearly every aspect of the build, from how the shells close to the liner thickness.

• HCPCS L0486

Pediatric Custom LSO Bivalve

This pediatric custom LSO bivalve starts with the patient's measurements and your prescription. It provides lumbar stabilization for conditions ranging from burst and compression fractures to post-operative fusion and spinal stenosis.

• HCPCS L0640

Custom Hip Abduction Orthosis

The Custom Hip Abduction Brace pairs a custom pelvic band and thigh cuff with your choice of hip joint. Preset quick-release buckles let the patient put the brace on at the same fit each time. It's made from MPE and fabricated to the patient's measurements or a cast.

• HIP Abduction

Custom Scoliosis Brace

OPTEC's custom scoliosis brace is a spinal orthosis used to help limit further progression of spinal curvature in idiopathic scoliosis. It is built to be lightweight and low-profile, and you can order it from a cast or measurements.

• Custom Spinal

Custom CTLSO

Every orthosis in this line starts with OPTEC's spinal database and physical library, one of the largest in the industry. Each brace is built to the patient's measurements and your prescription. The Minerva cervical attachment is available in adult, youth or pediatric size, to extend immobilization to C1–T1.

• Custom Spinal

Custom Bivalve Hip

Built to each patient's measurements or cast, the Custom Bivalve Hip anchors to the sacrum to immobilize the lumbar spine in cases of lumbar instability and lumbosacral fusion. You can configure it with several hip joint types, materials, and accessories.

• Custom Spinal

Custom TLSO Soft Body

For patients with kyphosis, osteoporosis, or spinal fractures, this custom TLSO combines a rigid plastic core with soft foam on the inside and firm Aliplast on the outside. It's fabricated to each patient's measurements and your specifications, with an anterior or bivalve opening.

• HCPCS L0482 · L0486
• TLSO

Custom TLSO Bivalve with ATE

This custom bivalve TLSO has an anterior thoracic extension (ATE) that takes your choice of PPK, SPK, PPX, or SPX attachment. The PPX and SPX versions have an adjustable hinge for flexion and extension control. Each brace is fabricated to the patient's measurements and your specifications, and it's used for fractures, kyphosis, osteoporosis, spinal stenosis, and post-surgical care.

• HCPCS L0486
• TLSO

Custom TLSO Bivalve High Profile

The Custom TLSO Bivalve High Profile is a two-piece spinal orthosis for support and immobilization in cases such as burst and compression fractures, kyphosis, and osteoporosis. OPTEC fabricates each one for a single patient from their measurements and your specifications.

• HCPCS L0486
• TLSO

Custom TLSO Anterior Opening

The Custom TLSO Anterior Opening provides thoracic stabilization and immobilization. It is used for compression fractures, osteoporosis, disc conditions, and post-operative care. The single-opening design is available as an anterior, anterior w/ tongue or anterior overlap design , and OPTEC builds each one to your specifications.

• HCPCS L0482
• TLSO

Custom SALO TLSO

For patients with scoliosis, cerebral palsy, muscular dystrophy, or other conditions that call for trunk support, the SALO TLSO stabilizes and supports the spine, including during wheelchair seating. It's built from layers of plastic, rigid foam, and soft foam, in a single-opening or bivalve design, and custom fabrication is available for same-day shipment.

• HCPCS L0482 · L0486
• TLSO

Custom SALO LSO

The SALO LSO from OPTEC USA provides spinal stabilization and support. It can be used across the general population and is especially well suited to pediatric, geriatric, and wheelchair-using patients. It comes in a single-opening or bivalve design, and custom fabrication is available for same-day shipment.

• HCPCS L0640
• LSO

Custom LSO Soft Body

This custom LSO Soft body spinal orthosis is built in three layers. A firm Aliplast outer layer covers a polyethylene shell or stays, with soft foam against the patient. Each one is fabricated to the patient's measurements and your specifications.

• HCPCS L0640
• LSO

Custom LSO Bivalve

You can trim the Custom LSO Bivalve to your own finished measurements or to OPTEC's, the same as every OPTEC custom spinal orthosis. Each brace is fabricated for one patient and supports lumbar stabilization in fracture, disc, and post-surgical cases.

• HCPCS L0640
• LSO

Custom LSO Anterior Opening

The Custom LSO Anterior supports and immobilizes the lumbosacral spine for conditions such as compression fractures, disc pathology, and spondylolisthesis. OPTEC builds each one to the patient's measurements and to your specifications.

• HCPCS L0640
• LSO

AFO

OPTEC's Solid Ankle AFO is a prefabricated polypropylene orthosis offered in four stock sizes. Each size can be ordered with a short or long sole plate, so one product line fits a wide range of patients.

• Prefabricated Lower Limb

Night Splint

The Optec USA Night Splint applies a gentle stretch to address plantar fasciitis and plantar and Achilles tendonitis. It is made from ultra-lightweight materials with a breathable liner, so patients can receive therapy while they sleep.

• Prefabricated Lower Limb

Proglide Cervical Collars

The PROGLIDE is a patented, PDAC-approved cervical collar for patients with cervical injuries who need a collar for extended wear. It comes in one size that fits all, and a knob adjusts the chin height to any of 12 levels. Available in 3 models : PG172, PG174, PG180

• HCPCS L0172 · L0174 · L0180